bedside co sleeper

Product Specification

The bedside co sleeper is with wooden grain coated, in “T-Shaped” design. You will find below more details. 

Product Details

• Large size suit from 0-6 months. 93X55X80/68cm 
• Healthy materail: soft linen fabric, Flexible ABS plastic, Long lifetime and light weigh aluminum. 
• 6 heights for differents needs and match differnt beds height. 
• Large storage basket connected by velcro. easy remove to wash. 
• Mattress with suppord and thicker foam. board in 0.5cm, foam 2.5cm thickness. surface made by peach skin fabric. 
• 4 small wheels hidden beneath. 
• Stretch legs, can be collect to save space. 
• The armrest designed outside. with a nice appearance. 
• Tilt angle by adjusting the 2 sides in different height. 
• A belt can be fastened to parents’ bed for security. 
• A slight rocking function. 
• Mesh on both sides for the visible care and air circulation. 

Product Certificate

EN1130 certificate

ASTM F2194 certificate

Product FAQs
Q: How do I assemble the bedside co sleeper?
A: The installation steps of the bedside co sleeper are as follows:
Installation components: bed base, storage basket, central support frame/mattress
Spread out the bed seat
Install the central support
Snap on basket tripod
Install the storage basket
Put in a breathable mattress

Q: What are the characteristics of your bedside co sleepers?
A: The  bedside co sleeper has a maximum load-bearing capacity of 15kg, a large storage space, and a load-bearing capacity of 15kg. The side can see through the net window, comfort shaker design, with a special mosquito net; 6 height adjustments and the height can be changed by pressing the adjustment button. The difference between the left and right sections prevents milk from overflowing.

Q: How to change the bedsideco sleeper into bedside co-sleeping mode?
A: If you want to convert the bedside co sleeper into the bedside co-sleeping mode, it is divided into two stages: window opening and installation. The steps are described as follows:
Window opening steps: Unzip the zipper and press the hidden tenon to separate the front edge bracket
Installation steps: After measuring the height of the adult bed and adjusting the height of the bedside bed, take out the safety fixing buckle on the side of the bed, then tighten the mattress (bed frame) around the circle, and install the fixing buckle. After confirming that it is close to the adult bed without gaps, it is close to the adult bed, and the bedside bed rail is lower than the adult mattress.

Company Overview

Contact information 

Kathy Xiang

E-mail: [email protected]